The following details the information and steps required to utilize a Touch Screen with a ComQi media player.
- Contact customer support to have the correct touch screen drivers available within your network. See the list of supported touch screens below.
- Apply the drivers to the player.
- Calibrate the touch screen using the USB calibration tool.
In order to change the touch screen drivers on a media player, the media player will need to be re-imaged. Be sure to use the correct touch screen driver!
Currently Supported Touch Screens and Calibration Tools
The following table details the current supported touch screens. If you have a touch screen that is not on this list please contact your account management team.
Touch Integrator |
Panel Type |
Touch System Provider |
Calibration tool |
TSI Touch |
NEC V421 |
IRTouchSystems |
|
TSI Touch |
NEC AS191WM |
3M Touch Systems |
|
TSI Touch |
NEC AS192WM-BK |
3M Touch Systems |
|
TSI Touch |
This is a aftermarket foil that can be fitted to a screen. |
VisualPlanet 2-1B64 single touch Foil |
|
N/A |
Elo 4200L |
Elo |
|
N/A |
Elo 1515L |
Elo |
|
N/A |
Elo E382709 |
Elo |
touch_generic_calibration_tool.zip |
N/A |
Elo 2740L |
Elo |
|
Horizon |
HDS 1Z00-5381NA |
pqlabs |
|
Panasonic |
BM421 |
pqlabs |
The touch screen calibration tools are provided by the screen manufacture and are installed on the media player as part of the driver patch. The calibration tools are not directly supported by ComQi.